| Number of Channels |
2 |
| Max Output Power @ 8 ohms |
2 x 250W 1 x 1000W (Bridge) |
| Max Output Power @ 4 ohms |
2 x 500W 1 x 1000W (4Ω BTL Mode Selected) |
| Output Circuitry |
Class D - full bandwith PWM modulator with ultra low distortion |
| Output Voltage |
70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded) |
| THD @ Rated power 4Ω (1kHz) |
<0.05% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power) |
| Signal To Noise Ratio |
>120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) |
| Frequency Response |
20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power) |
| Damping Factor |
>1000 (8Ω load, 1kHz and below) |
| Power Supplies |
Switch mode power supply with PFC (Power Factor Correction) and integral standby converter |
| Operating Range |
Universal Mains, 85-265V |
| Consumption / Current draw and Thermal dissipation @ 230 V |
11.2W / -A / 38.3 BTU/h (Idle)
173W / -A / 143.4 BTU/h (I/8 max. power@4Ω) |
| Protections |
Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection |
| Analog Input |
1 x XLR electronically balanced, +12dB |
| Analog Output |
1 x XLR electronically balanced (Link) |
| AD & DA Converters |
Cs4272 24bit |
| Frequency Response (DSP) |
20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz |
Социальные закладки