Приобрел Винтажный KEF Cantor3 84 года, акустическое oформление ПИ.
http://www.kef.com/history/1980/cantor3.asp
Интересно узнать ваше мнение, может кто когда сталкивался, стоит над ним работать вообще?
Cantor III Specifications
Frequency Range 58Hz to 20kHz ± 3dB at 2m on reference axis ( -10dB at 43Hz and 30kHz)
Directional characteristics within 2dB of response on reference axis up to 20kHz for ± 5є vertically
up to 12kHz for ± 20є horizontally
Maximum Output 107dB spl on programme peaks under typical listening conditions
Characteristic Sensitivity Level 87dB spl at 1m on reference axis for pink noise input of 1W
Distortion
Measured at 1m on reference axis at man spl of 90dB, anechoic conditions Second harmonic:
less than 1% from 90Hz to 20kHz
Third harmonic: less than 1% from 40Hz to 20kHz
Enclosure Type Mechanical reflex
Internal Volume 17 litres
Nominal Impedance 8 ohms
Maximum amplifier power: normal 80W, audiophile 100W
Minimum amplifier power: normal 10W
Weight 6.8kg
Weight 7.75kg (17.15lb)
Dimensions 502 (h) x 247 (w) x 212mm (d) mm
Социальные закладки